Cara Flash Maxtron Diamond New SPD Firmware V1.0_6.0_20170227

Firmware maxtron diamond new ada beberapa versi build-nya atau sering kita kenal dengan nomor bentukan, bisa kita cek via pengaturan\about.

Dus box maxtron diamond new

Adapun maxtron diamond bootloop cara hard resetnya boleh via recovery-nya bisa dicoba dengan tombol kombinasi berikut : power volume atas, power volume bawah, power dua volume, power home volume. Jika masih gagal, silakan lanjut flash saja.

Pastikan bentuk kesing belakang dan tulisan di stiker sama

Cara flash maxtron model diamond new bisa kita gunakan research download saja, karena chipsetnya spreadtrum, dan pastikan driver sudah kita instal sebelumnya.

Flash maxtron diamond spd sebagai berikut :

1. Buka research download dulu (pake versi 4xx) saja
2. Load packet
3. Ambil file PAC nya
4. Masuk ke setting\backup, hilangkan semua centang atas dan bawah, namun jika tidak disetting tidak apa-apa, hanya kadang berpengaruh pada imei saja
5. Klik start downloading
6. Tekan tombol boot (volume atas, atau volume bawah) dan lanjut colok usb, jika setelah terdeteksi driver tidak jalan, tekan stop lanjut ulangi.

Firmware maxtron diamond spd ini hasil backup dari hape baru, sengaja kita ambil yang baru, masih segel lanjut kita backup.

Aplikasi standar bawaan diamond spd new

Pastikan versinya sama, karena setau saya ada beberapa versi build-nya. jika setelah flash LCD blank, silakan pelajari solusi lcd bergaris dan blank maxtron diamond new spd setelah flash.

Nomor bentukan {joelzr.com}_Z2_KW_YPE_M509_MAXTRON_QHD_V1.0_6.0_20170227

Device Brand   : SPRD
Device Model   : sp7731c_1h10_32v4_ypr_qhd_m509_maxtron
Device CPU     : sp7731c_1h10_32v4_ypr_qhd_m509_maxtron
Device IntName : sp7731c_1h10_32v4_ypr_qhd_m509_maxtron
Device Version : 6.0
Device Compile : 27/02/2017 6:53:52
Device Project : MRA58K release-keys
Device ExtInfo : MAXTRON-DIAMOND

Card found: S/N : 63B4EF67 , v0136
Chinese Miracle II  [SPD module] v 1.26

Set mode to : SP [SC773x] eMMC [Android 6.x]

Operation : Read FullFlash [ v1.26 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 3 ]
Port Opened
Sync...
Initial Boot Failed!
Boot not done, reason : Wrong BootKeys
Hint : Reset power and use ANOTHER BootKey ( VOL up or VOL down )

Reconnect Power/Cable!


Operation : Read FullFlash [ v1.26 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 3 ]
Port Opened
Sync...
Initial Boot Failed!
Boot not done, reason : Wrong BootKeys
Hint : Reset power and use ANOTHER BootKey ( VOL up or VOL down )

Reconnect Power/Cable!


Operation : Read FullFlash [ v1.26 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 3 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0   
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 3 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0   
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 3 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0   
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731c_1h10_32v4_ypr_qhd_m509_maxtron
Model Brand : SPRD
Model Device: sp7731c_1h10_32v4_ypr_qhd_m509_maxtron
AndrVersion : 6.0
BaseBand CPU: SP7731C_1H10_32V4_YPR_QHD_M509_MAXTRON
Project Ver : MRA58K release-keys
Model Ext   : MAXTRON-DIAMOND

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_540x960.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : logo3.bin
[Read Ok] : logo4.bin
[Read Ok] : logo5.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : sysinfo.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1600 MiB
Saved to : C:\Users\joelzr\Documents\Maxtron Diamond New\SP7731C_1H10_32V4_YPR_QHD_M509_MAXTRON_sp7731c_1h10_32v4_ypr_qhd_m509_maxtron_6.0_MRA58K_release-keys_MAXTRON-DIAMOND\
Done!

Elapsed: 00:10:37

Reconnect Power/Cable!

Firmware Maxtron Diamond New SPD

Mahar Pulsa 25.000,- ke nomor 0852 61020 345

Silakan konfirmasi password via WA

Khusus pengguna selain telkomsel,wajib via WA
karena balasan SMS biasanya pending sampe 5 menit

Or via paypal $3 (3 dollar)

WA/SMS : +6285261020345

Email : pariscell@gmail.com

Z2_KW_YPE_M509_MAXTRON_QHD_V1.0_6.0_20170227
 (Fix LCD Blank/Bergaris__KESING PUTIH TESTED)

SPD_Upgrade_Tool_R4.0.0001

Driver_Pack_SPD_MTK

Nvram Maxtron SPDNV (cm2 dongle) 

------------------------------------------------------------------------

Maxtron Diamond New, Diamond V13, Diamond MTK, LCD bergaris/Blank, Firmwarenya ada disini, klik link

------------------------------------------------------------------------

Catatan : Di dus box tertulis system android 5.0

_______ Silakan abaikan, karena system android dari dalam hapenya adalah 6.0