Firmware Maxtron Pluto V10 6.0 20170608

Joelzr.com | Firmware Maxtron Pluto - Ada beberapa versi build-nya atau sering kita kenal dengan nomor bentukan, bisa kita cek via pengaturan\about, samakan dengan versi dengan yang saya upload baru download.

Bedakan Pluto biasa dengan Pluto Prime

Jika ternyata hapenya beda, silakan untuk download firmware maxtron pluto prime yang telah kita sediakan file dan tutorialnya disana.

Adapun Maxtron Pluto bootloop cara hard resetnya boleh via recovery-nya bisa dicoba dengan tombol kombinasi berikut : power volume atas, power volume bawah, power dua volume, power home volume. Jika masih gagal, silakan lanjut flash saja.

Cara flash Maxtron Pluto bisa kita gunakan research download saja, karena chipsetnya spreadtrum, dan pastikan driver sudah kita instal sebelumnya.

Flash Maxtron Pluto spd sebagai berikut :

1. Buka research download dulu (pake versi 4xx) saja
2. Load packet
3. Ambil file PAC nya
4. Masuk ke setting\backup, hilangkan semua centang atas dan bawah, namun jika tidak disetting tidak apa-apa, hanya kadang berpengaruh pada imei saja
5. Klik start downloading
6. Tekan tombol boot (dua volume) dan lanjut colok usb, jika setelah terdeteksi driver tidak jalan, tekan stop lanjut ulangi.

Firmware Maxtron Pluto ini hasil backup dari hape baru, sengaja kita ambil yang baru, masih segel lanjut kita backup.

(Baca juga) :  solusi lcd bergaris dan blank maxtron diamond new spd setelah flash.


Created by Infinity-Box (c) Chinese Miracle II (c) 2017
Device Brand   : S7731C
Device Model   : s11c_s50c
Device CPU     : s11c_s50c
Device IntName : s11c_s50c
Device Version : 6.0
Device Compile : 13/03/2018 12:11:36
Device Project : MAXTRON_PLUTO_V10_20170608
Device ExtInfo : MAXTRON PLUTO

Card found: S/N : 63B4EF67 , v0136
Chinese Miracle II  [SPD module] v 1.26

Set mode to : SP [SC773x] eMMC [Android 6.x]

Operation : Read FullFlash [ v1.26 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Device boot not done
Check Drivers
Try again


Reconnect Power/Cable!


Set mode to : SP [SC773x] eMMC [Android 6.x]

Operation : Read FullFlash [ v1.26 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 5 ]
Open Port Failed!

Reconnect Power/Cable!


Operation : Read FullFlash [ v1.26 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 5 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0   
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 5 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0   
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 5 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0   
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : s11c_s50c
Model Brand : S7731C
Model Device: s11c_s50c
AndrVersion : 6.0
BaseBand CPU: S11C_S50C
Project Ver : MAXTRON_PLUTO_V10_20170608
Model Ext   : MAXTRON PLUTO

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : sysinfo.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1793 MiB
Saved to : C:\Users\joelzr\Documents\@@CM2\Maxtron Pluto\S11C_S50C_s11c_s50c_6.0_MAXTRON_PLUTO_V10_20170608_MAXTRON_PLUTO\
Done!

Elapsed: 00:16:07

Reconnect Power/Cable!

Maxtron Pluto

Firmware Maxtron Pluto

Mahar Pulsa 25.000,- ke nomor 0852 61020 345

Silakan konfirmasi password via WA

Or via paypal $3 (3 dollar)

WA/SMS : +6285261020345

Email : pariscell@gmail.com

MAXTRON_PLUTO_V09_S11C_S50C_s11c_s50c_6.0_20170603
MAXTRON_PLUTO_V10_S11C_S50C_s11c_s50c_6.0_20170608
Maxtron_Pluto_V11_20171226_Fix_LCD_Blank
SC77xx_Maxtron_Pluto_V10_20170608_Testednew
SPD_Upgrade_Tool_R4.0.0001

Driver_Pack_SPD_MTK