Firmware Huangmi M5 Spreadtrum Hasil Read Dari Hape Normal

Joelzr.com | Download firmware Huangmi M5 SPD - Sebelumnya terima kasih banyak saya ucapkan buat para pengunjung blog dan berhubung ini masih suasana lebaran, izinkan saya mengucapkan "Minal aidin wal faidzin mohon maaf lahir bathin" Semoga kita selalu mendapat rahmat Allah S.W.T, Amin.

Sebenarnya stock rom Huangmi M5 ini tidaklah terlalu langka, hanya saja banyak versi dan cocok tidak cocok saat kita flash, artinya banyak menimbulkan kendala setelah kita flash dengan firmware kebanyakan, rata-rata blang lcd setelah flash atau bisa jadi lcd bergaris setelah disoftware.

 Huangmi M5 Firmware

Apakah firmware Huangmi M5 ini tested?
Benar, namun jika versi build atau nomor bentukan berbeda dengan hape ditangan anda, bisa jadi file ini tidak bermanfaat sama sekali, artinya sukses tidaknya saat dan setelah flash itu sebagiannya tergantung pada kecocokan versi firmware dengan hape yang akan kita software

Baca Juga :

• Firmware Nexcom A2000 V0.2 Spreadtrum Fix LCD Blank Setelah Flash
• Download Firmware Maxtron V17 Read Cm2
• Download Combination SM-N935F Note Fan Edition Binary 2

Huangmi M5 bootloop, lupa pola, lambat dan system terhenti, silakan lakukan hard reset, jika tidak bisa, jalan satu-satunya adalah dengan flash.

Cara flash Huangmi M5 spd sebagai berikut :

1. Buka research download dulu (pake versi 4xx) saja
2. Load packet
3. Ambil file PAC nya
4. Hilangkan centang semua, kecuali : Fdl1, Fdl2, Recovery, System, Persist, Userdata, Bootlogo
5. Masuk ke setting\backup, hilangkan semua centang atas dan bawah, namun jika tidak disetting tidak apa-apa, hanya kadang berpengaruh pada imei saja
6. Klik start downloading
7. Tekan tombol boot (dua volume atau salah satu saja) dan lanjut colok usb, jika setelah terdeteksi driver tidak jalan, tekan stop lanjut ulangi.

Created by Infinity-Box (c) Chinese Miracle II (c) 2017
Device Brand   : Huangmi
Device Model   : sp7731c_1h10_32v4
Device CPU     : sp7731ceb
Device IntName : sp7731c_1h10_32v4_oversea
Device Version : 6.0
Device Compile : 15/09/2017 2:22:12
Device Project : MRA58K release-keys
Device ExtInfo : M5

Chinese Miracle II  [SPD module] v 1.26

Operation : Convert InfinitySC to SPRD PAC [ v1.26 ]

Target : SP7731CEB_sp7731c_1h10_32v4_6.0_MRA58K_release-keys_M5
Step  #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL

Step  #2 : Select logic
Select Logic : SC7731

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7731C_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[ADD FILE] : logo_720x1280.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : sysinfo.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x001A
Sign PAC ...
Sign Ok! FW compiled!
Elapsed: 00:02:19

Saved to : SP7731CEB_sp7731c_1h10_32v4_6.0_MRA58K_release-keys_M5.pac
Done!

==================================

========================

Card found: S/N : 2289584B , v0137
Chinese Miracle II  [SPD module] v 1.27

Set mode to : SP [SC773x] eMMC [Android 6.x]

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

 ====  Wait for phone...

Device boot not done
Check Drivers
Try again


Reconnect Power/Cable!


Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

 ====  Wait for phone...

Device boot not done
Check Drivers
Try again


Reconnect Power/Cable!


Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

 ====  Wait for phone...

Phone found! [ 3 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0   
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 3 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0   
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 3 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0   
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731c_1h10_oversea
Model Brand : Huangmi
Model Device: sp7731c_1h10
AndrVersion : 6.0
BaseBand CPU: SP7731CEA
Project Ver : MRA58K release-keys
Model Ext   : M5

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_720x1280.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : logo2.bin
[Read Ok] : logo3.bin
[Read Ok] : logo4.bin
[Read Ok] : logo5.bin
[Read Ok] : logo6.bin
[Read Ok] : logo7.bin
[Read Ok] : logo8.bin
[Read Ok] : logo9.bin
[Read Ok] : logo10.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1636 MiB
Saved to : E:\BACUP FILE\HUANGMI\HUANGMI M5\SP7731CEA_sp7731c_1h10_6.0_MRA58K_release-keys_M5\
Done!

Elapsed: 00:07:25

Reconnect Power/Cable!


Operation : Convert InfinitySC to SPRD PAC [ v1.27 ]

Target : SP7731CEA_sp7731c_1h10_6.0_MRA58K_release-keys_M5
Step  #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL

Step  #2 : Select logic
Select Logic : SC7731

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7731C_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[ADD FILE] : logo_720x1280.bin
[ADD FILE] : fblogo_480x854.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : sysinfo.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0018
Sign PAC ...
Sign Ok! FW compiled!
Elapsed: 00:01:07

Saved to : SP7731CEA_sp7731c_1h10_6.0_MRA58K_release-keys_M5.pac
Done!

Firmware Huangmi M5

Mahar Pulsa 25.000,- ke nomor 0852 61020 345

Silakan konfirmasi password via WA

Or via paypal $3 (3 dollar)

WA/SMS : +6285261020345

Email : pariscell@gmail.com

Penting :

• JIKA BOOTLOOP : WAJIB CENTANG FDL1, FDL2, SYSTEM, USERDATA, CACHE
• JIKA BLANK/LCD BERGARIS : Silakan download koleksi dibawah, semoga ada yang cocok dengan versi build (nomor bentukan) hape anda.

=================================================================

Seri EB firmware

1. SP7731CEB_sp7731c_1h10_32v4_6.0_MRA58K_release-keys_M5 (jamu 1) [649 MB]

=================================================================

=================================================================

Seri EB firmware

2. SP7731CEB_sp7731c_1h10_32v4_6.0_MRA58K_release-keys_M5 (jamu 2 racikan) [634 MB]

2. SP7731CEB_sp7731c_1h10_32v4_6.0_MRA58K_release-keys_M5 (jamu 2 tanpa system) [21 MB]

Keterangan no 2 :

file JAMU RACIKAN 2 diatas sama sebenarnya, yang satunya lengkap dengan "system" yang satunya tanpa file "system", jadi kita upload keduanya, barangkali mau coba fix lcd blank saja, silakan download kurannya lebih kecil (tanpa system)__jika setelah flash hasilnya bootloop, iru wajib download yang full [634 MB]

=================================================================

3. Huangmi_M5_S16_J_BP248_Huangmi_M5_V2.1_20170913
4. Huangmi S16_A_BP248_Huangmi_M5_V2.1_20171205_FixBlank

=================================================================

=================================================================

Seri EA firmware

Nomor bentukan
S16_L_BP248_Huangmi_M5_1+4G_YYS_68200_V2.1_20180116

S16_L_BP248_Huangmi_M5_1+4G_YYS_68200_V2.1_20180116

5.[CEA1]_SP7731CEA_sp7731c_1h10_6.0_MRA58K_release-keys_M5 (Size : 1.67 MB)
6.[CEA2]_SP7731CEA_sp7731c_1h10_6.0_MRA58K_release-keys_M5 (Size : 1.68 MB)

=================================================================

NvRam_Huangmi_M5_CX77xx_SPDNV 

SPD_Upgrade_Tool_R4.0.0001

Driver_Pack_SPD_MTK

=================================================================